 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46765(AT)
The system shall not compromise conformance to any Federal Motor Carrier Safety Regulation
referenced herein or to any Federal Motor Vehicle Safety Standard.
* 3.4.12 Cab type. Unless otherwise specified, the chassis manufacturer shall furnish any type
of his standard or optional full width model cab. When specified (see 6.2), a cab with a forward
tilting hood and fender assembly, including tilting and locking mechanism; or a vehicle with a
butterfly hood and with bolt on fenders capable of being removed or swinging forward when
unbolted; shall be furnished. Tilting shall not interfere with present or future installations of
additional equipment, such as a snowplow or front mounted winch. When specified (see 6.2), a
tilt type cab with tilting and locking mechanism shall be furnished. Tilt cab features shall be in
accordance with the Employee Safety and Health Standards of Federal Motor Carrier Safety
Regulation 399, including the first step height, which shall be not more than 610 mm (24 inches).
* 3.4.12.1 Cab features. Cab doors shall be equipped with locks, operable from inside the cab
through mechanical linkage with both doors equipped with external, key-operated locks. Drip
rails shall be installed above the cab doors. Safety grips or grab handles shall be provided on
each side of the cab to assist personnel in entering and leaving the cab. When the front tires
extend beyond the cab fenders, rubber fender extensions extending at least to the outside of the
tire tread shall be furnished. For tilt type cabs, provisions to facilitate cleaning the windshield
shall be provided by means of a bumper step, or bumper step cutouts, and a grab handle located
under the windshield.
* 3.4.12.2 Cab interior. Unless otherwise specified, the cab shall have upholstered, full-width,
adjustable seat and back or individual, adjustable driver's seat and individual passenger seat.
When specified (see 6.2), an individual adjustable driver's seat and an individual passenger seat
shall be provided. When specified (see 6.2), the driver's seat shall be the manufacturer's standard
air ride suspension type. The color of the upholstery and the interior finish shall be compatible
with the exterior color (see 3.1.1.1). White upholstery shall not be provided. Interior lighting
shall be provided. Two pairs of seat belts shall be installed. Outboard seats shall have
combination pelvic and upper torso restraint seat belts.
3.4.13 Steering. Power steering shall be furnished
* 3.4.14 Windshield wipers and washers. The vehicle shall be equipped with dual windshield
wipers and windshield washers. Windshield wipers shall be multispeed type and operated by
either air or electric motor(s). When specified (see 6.2), and if electric motor wipers are
furnished, intermittent wipers shall be furnished.
17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals