 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46768D(AT)
construction, with standard or optional items which meet or exceed the requirements of this
specification. The trailer shall be travel type, intended for living quarters, and shall be
completely self-contained. All items shall be as represented and rated in the manufacturer's sales
information, including special or mounted equipment. The model furnished shall be not older
than the manufacturer's current model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified in
3.1, the vehicle shall be furnished with special equipment as specified herein.
* 3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance with
MIL-STD-1223. As specified by the procuring activity for the appropriate service (see 6.2), the
exterior color shall be in accordance with MIL-STD-1223.
* 3.1.1.2 Markings and data plates. As specified by the procuring activity for the appropriate
military service (see 6.2), identification marking and data plates shall be in accordance with
MIL-STD-1223. When specified (see 6.2), concealed markings shall be furnished.
* 3.1.1.3 Rustproofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297.
3.1.1.4 Coupling device. When specified (see 6.2), the trailer shall be equipped with a
lunette coupler ring conforming to MS 51336 and MS 51339. The lunette installation shall
provide for a 100 mm (4-inch) vertical range of adjustment.
* 3.1.1.5 Blackout provisions. When specified (see 6.2), in addition to the manufacturer's
standard drapes (see 3.5.11(f)), all windows and doors shall have blackout curtains, shades, or
other means of preventing the interior light from being visible outside of the vehicle.
* 3.1.1.6 Brake lights. At least one pair of brake lights shall override the four-way emergency
flasher or the two systems shall be independent of each other. Modifications to the
manufacturer's standard product to accommodate this requirement shall not compromise
conformance to any Federal Motor Carrier Safety Regulation referenced herein or to any Federal
Motor Vehicle Safety Standard.
3.2 General design.
3.2.1 Safety standards. The plumbing, heating and electrical systems shall conform to
National Fire Protection Association (NFPA) Standard No. 501. The vehicle and all furnished
accessories shall comply with all Federal Motor Vehicle Safety Standards in effect on the date of
manufacture.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals