 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-46780D(AT)
4.3 Classification of tests.
(a) Acceptance tests, 4.3.1 through 4.3.1.21.
(b) Control tests, 4.3.2 through 4.3.2.13.
(c) Comparison test (CY), 4.3.3 through 4.3.3.12.
4.3.1 Acceptance of tests. Each completed vehicle (less payload) shall be operated for a
distance of not less than 5 miles, at place of manufacturer by the contractor and subjected to
examinations (see table IX and X) and subjected to test specified herein (see table XI). Vehicle
shall be driven in reverse gear a minimum of 50 feet. Vehicle shall be free of any defects
specified in Table IX, and shall meet all performance requirements specified herein.
4.3.1.1 Test failure. If a vehicle fails to pass any acceptance test specified herein, the
Government inspector shall withhold acceptance of subsequent vehicles until evidence has been
provided by the contractor that the corrective action bas been taken.
Table XI. Location for tests
Government
Title
Paragraph
Place of
Proving
Numbers
Manufacture
Ground
Acceptance tests
4.3.1
X
X
Hard top and rear window check
4.3.1.2
X
X
Soft top check
4.3.1.3
X
X
Electrical circuits check
4.3.1.4
X
X
Headlights check
4.3.1.4.1
X
X
Radio receptacle check 4.
4.3.1.4.2
X
X
Controls check
4.3.1.5
X
X
Adjustment mechanism check
4.3.1.6
X
X
Truck, tank fuel servicing
4.3.1.7
X
(M49A2C) tank leak test
Water tank truck (M50A3) body
4.3.1.8
X
and components check
Truck maintenance pipeline
4.3.1.9
X
construction check
Removable cargo body check
4.3.1.9.1
X
X
Transfer case, front axle
4.3.1.10
X
X
engagement check
Braking ability check
4.3.1.11
X
Cramping angle check
4.3.1.12
X
Dump truck check
4.3.1.13
X
Dump side cargo body check
4.3.1.14
X
Winch check
4.3.1.15
X
Wheel balance check
31
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals