Click here to make tpub.com your Home Page

Page Title: Order of precedence
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-48558B(AR)
(Applicaiton for copies of the DSAM should be addressed to
the Superintendent of documents, Government Printing Office,
Washington,  DC  20402.)
2.3 Order  of  precedence. In the event of a conflict between
the text of this specification and the references cited herein
(except for associated detail specifications, specification sheets
or MS standards) , the text of this specification shall take
precedence. Nothing in this specification, however, shall
supersede the applicable laws and regulations unless a specific
exemption has been obtained.
3.
REQUIREMENTS
3.1 Hazardous  material. This telescope contains tritium, a
radioactive material. A Nuclear Regulatory Commission License is
required for the manufacture of this item, and DSAM 4145.8 for
procurement and possession of radioactive material.
3.2 First  article. When specified, a sample shall be
subjected to first article inspection (see 4.2 and 6.2).
3.3 Materials.  Materials shall be in accordance with
drawings, material specifications, and general specifications
forming a part of this specification.
3.4 Fabrication. The telescope shall be manufactured in
accordance with Drawing F11741626.
3.5 General  specifications. The contractor shall be
responsible for the compliance with the requirements of
specifications MIL-0-13830 and MILF13926.
3.6 Orientation.  Whenever specified herein, the conditions
listed below shall apply:
a.  The telescope shall be mounted on an appropriate
fixture, which locates and holds in place the locating Pin
in a horizontal plane and positions the "V" Holder Assembly
10549272 .750 002" above and to the rear of the pin.
b.
The "V" located on holder assembly 10549272, snail be
seated over a .812" - .0005" diameter. The latch on the
holder assembly shall be locked to a .500 - .001" diameter.
c.
A horizontal line of sight shall be-provided which is
parallel in azimuth to the place defined by surfaces "X" and
"Y" on Drawing 11741626.
3

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business