 |
|||
|
Page Title:
Tester, Noise, X-Band, AN/PSM-44: 11822700 |
|
||
| ||||||||||
|
|  INCH-POUND
MIL-T-48621A (AR)
--
9 August 1991
SUPERSEDING
MIL-T-48621 (AR)
.
21 July 1980
MILITARY SPECIFICATION
TESTER, NOISE, X-BAND, AN/PSM-44:
11822700
This specification is approved for use by the U. S.
and Chemical Command, and is available or use
Armament, Munitions
by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 scope. The Tester, Noise, x-Band, hereinafter referred to
as the "Noise Tester, consists of microwave and electronic
components necessary to provide a pass/fail indication of the FM
Sideband Noise Power over the range of 600 HZ to 2 MHz from the
carrier of a CW RF source operating anywhere in the frequency range
from 9140 to 9250 Megahertz and having a power output of +10 dBm to
+20 dBm maximum at the input port (RF IN) of the Noise Tester. The
Noise Tester Is a Type I, Class 3, Style E, Color W, configuration
as referenced in MIL-T-28800. This specification establishes the
performance and test requirements for the Noise Tester, 13822700
(see 6.1). .
APPLICABLE DOCUMENTS
2*
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this
. specification to -the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the
issue of the Department of Defense Index of Specifications and
Standards (DODISS) and supplement thereto, cited in the
solicitation (see 6.2).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals