 |
|||
|
Page Title:
Box, Fiberboard (Outer), Alternative, Packing, Ammunition, Drawing 9221261 |
|
||
| ||||||||||
|
| MIL-T-50356A
Major
None defined
Minor
201 Contents loose Visual/Manual
202 Strapping missing, loose, broken, or improperly assembled
Visual/Manual
203 Contents of box exposed Visual
204 Box damaged Visual
205 Marking missing, incorrect, or illegible
Visual
206 Number of units incorrect Visual
4.3.2.17 Box, Fiberboard (Outer), Alternative, Packing, Ammunition, Drawing 9221261.
Critical
None defined
Major
None defined
Minor
201 Contents loose Manual/Visual
202 Hardware missing, loose, broken, or improperly engaged
Visual
203 Strapping missing, loosed, broken, or improperly engaged
Visual
204 Contents of box exposed Visual
205 Box damaged Visual
206 Marking missing, incorrect, or illegible
Visual
4.4 Inspection testing. The following tests shall be performed in accordance with 4.5.
4.4.1 Hydrostatic pressure. Each body and head shall be subjected to the hydrostatic pressure
test. Failure of any unit to comply with 3.2 shall be cause for rejection of the subassembly.
4.4.2 Protective finish. The number of units for protective finish tests shall be in
accordance with the applicable specification. Failure of any unit in the inspection sample to
comply with the requirements of the applicable specification shall be cause for rejection of the
lot.
4.4.3 Residual magnetism. Each assembly shall be subjected to the test for excessive residual
magnetism as specified in 4.5.3. Failure of any unit in the inspection sample to comply with 3.4
shall be cause for rejection of the assembly.
4.4.4 Shear pin strength. Fifty pins from each lot of shear pins shall be tested for shear
strength. Failure of any shear pin to comply with 3.5 shall be cause for rejection of the lot.
4.5 Test methods and procedures.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals