 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-52698A
ANSI/UL-583 - Standards for Safety (Power-Operated Industrial Trucks).
(Application for copies should be addressed to Underwriters Laboratories,
Inc., 161 Avenue of the Americas, New York, NY 10013; 207 East Ohio Street,
Chicago, IL 60611; or 1655 Scott Lane, Santa Clara, CA 95050.)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
Guide to NEMA Standards Publication - Motors and Generators.
(Application for copies should be addressed to the National Electrical
Manufacturers Association, 155 East 44th Street, New York, NY 10017.)
(Nongovernment standards and other publications are normally available from
the organizations which prepare or which distribute the documents. These
documents also may be available in or through libraries or other informational
services.)
2.3 Order of precedence . In the event of a conflict between the text of
this specification and the references cited herein, (except for associated
detail specifications, specifications sheets or MS standards), the text of
this specification shall take precedence. Nothing in this specification,
however, shall supersede applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Description. The walkie straddle truck (hereinafter referred to as
"truck") shall be driven by an electric motor with an industrial battery as a
power source. It shall consist of: two straddle legs, a tiering mast, and a
manual T-shaped steering handle with controls incorporated on the handle.
3.2 First article. Unless otherwise specified (see 6.2), a sample shall be
subjected to first article inspection (see 4.3 and 6.3). Any changes or
deviations of trucks from the approved first article during production will be
subject to the approval of the contracting officer. Approval of the first
article will not relieve the contractor of his obligation to furnish trucks
conforming to this specification.
3.2.1 Certificates of compliance . When specified (see 6.2), or upon
request, a certificate of compliance with the requirements of this
specification shall be furnished. Back-up data to support the certificate of
compliance may be requested by the contracting officer for review. The
certificate of compliance shall read as follows:
This certifies that the
(component, part or assembly)
complies with all provisions and requirements of specification
paragraph
. The certificates shall be signed by a duly
authorized agent of the contractor.
3.3 Material. Material shall be as specified herein. Materials not
specified shall be selected by the contractor and shall be subject to all
provisions of this specification.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals