|
| MIL-T-52843C
APPENDIX
TEST METHOD NO. 5 (CONT'D)
(3) With the engine at idle low speed, slowly tilt the load
from full rearward to full forward 10 degrees below
horizontal and back again not less than ten times. Tilt
forward shall be done with control valve wide open 5
times and "feathered" 5 times. Observe and record any
evidence of cavitation in the tilt circuit or loss of
operator control. Record pressure readings. NOTE:
Pressure readings are not required for determining tilt
cylinder cavitation for quality conformance testing
purposes.
73
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |