 |
|||
|
|
|||
| ||||||||||
|
| MIL-T-52843C
APPENDIX
TEST METHOD NO. 26 (CONT'D)
c. Forks and Fork Spacing.
(1) With no load on the forks, move the forks as close
together as possible and measure the distance between the
inside edges of the forktines. Move the forks as far
apart as possible and measure the distance over the
outside edges of the forktines.
(2) Measure the forktine length, forktine width, forktine
thickness at the heel and at the tip, and the fork taper.
d. Sideshift.
(1) With sideshift carriage and forks centered on the truck,
spread the forks to minimum 34 inches (outside to
outside).
(2) Sideshift level forks to extrem left position. Note and
e
measure any increase in truck width and whether there are
any protrusions beyond the sideshift carriage.
(3) Sideshift forks to extreme right position. Measure
sideshift travel. Note and measure any increase in truck
width and whether there are any protrusions beyond the
sideshift carriage.
(4) Sideshift forks to extreme left position and measure
travel.
(5) Place rated load on the forks. Sideshift to the extreme
left position. Oscillate to extreme counterclockwise
position.
(6) Oscillate the load to extreme clockwise position.
Sideshift load to extreme left side position.
96
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals