 |
|||
|
Page Title:
First article (initial production) approval |
|
||
| ||||||||||
|
|  MIL-T-60826B(MU)
of this specification. Definitions of inspection terms shall be as listed
in MIL-STD-109.
4.2 First article (initial production) approval. - The requirement
for first article approval and the responsibility (Government or contrac-
tor) for first article testing shall be as specified in the contract. The
sample for first article approval tests shall consist of 3 telescopes plus
3 each of all items covered by SQAP. The sample shall be manufactured in
the same manner, using the same materials, equipment, processes, and pro-
cedures as used in regular production. All parts anbd materials, includ-
ing packaging and packing, shall be obtained from the same source of supply
as used in regular production.
4.2.1 Government testing. - When the Government is responsbile for
conducting first article approval tests, the contractor, prior to sub-
mitting the sample to the Government, shall inspect the sample to insure
that it conforms to all the requirements of the contract and submit a
record of this inspection with the sample, including certificates of
conformance for materials.
4.2.2 Contractor testing. - When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
Government reserves the right to witness the contractor's inspection.
4.3 Inspection provisions.
4.3.1 Submission of product - Unless otherwise specified by the
contracting officer, inspection lot size, lot formation, and presentation
of lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. - All components and sub-
assemblies shall be inspected in accordance with the inspection pro-
visions contained in Supplementary Quality Assurance Provisions (SQAP)
listed in the List of Inspection Documents (IEL), when provided with
the technical data package (TDP). In the absence of SQAP's, the ap-
plicable Quality Assurance Provisions of MIL-F-13926 shall apply.
4.3.2.2 Final acceptance inspection. - Subsequent to first article
approval, examination and tests related to Section 3 herein shall be
performed on a single defect (individual characteristic) basis in accor-
dance with MIL-STD-105 and the sampling plans specified in Tables 1, II
and III. Examination and test for packaging and marking shall be in
accordance with MIL-P-14232 and Section 5 herein. The tabulated class-
ification of defects in Tables I, II and III shall constitute the minimum
inspection to be performed by the supplier after first article approval
and prior to Government acceptance or rejection by item or lot.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals