 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62021E(AT)
providing for ready attachment of air hoses from a towing vehicle. The service and emergency
couplers shall be identified and provided with dummy gladhand couplers with chains. The system
shall not compromise conformance to any Federal Motor Carrier Safety Regulation referenced
herein or to any Federal Motor Vehicle Safety Standard.
*
3.4.12 Cab. Unless otherwise specified, the chassis manufacturer shall furnish any type of
his standard or optional full width cab. When specified (see 6.2), a cab with a forward tilting
hood and fender assembly, including tilting and locking mechanism, shall be furnished. Tilting
shall not interfere with present or future installations of additional equipment, such as a front
mounted winch. When specified (see 6.2), a tilt type cab with tilting and locking mechanism shall
be furnished. Tilt cab features shall be in accordance with the Employee Safety and Health
Standards of Federal Motor Carrier Safety Regulation 399, including the first step height, which
shall be not more than 610 mm (24 inches). Cab doors shall be equipped with locks, operable
from inside the cab through mechanical linkage, with both doors equipped with external, key
operated locks. Drip rails shall be installed above the cab doors. Safety grips or grab handles
shall be provided on each side of the cab to assist personnel in entering and leaving the cab.
When the front tires extend beyond the cab fenders, rubber fender extensions extending at least to
the outside of the tire tread shall be furnished. For tilt type cabs, provisions to facilitate cleaning
the windshield shall be provided by means of a bumper step, or bumper step cutouts, and a grab
handle located under the windshield.
*
3.4.12.1 Cab interior. Unless otherwise specified, the cab shall have an upholstered, full
width, adjustable seat and back or individual, adjustable, driver's seat and individual passenger
seat. When specified (see 6.2), an individual, adjustable, driver's seat and an individual passenger
seat shall be provided. When specified (see 6.2), the driver's seat shall be the manufacturer's
standard air ride suspension type. The color of the upholstery and the interior finish shall be
compatible with the exterior color (see 3.1.1.1). White upholstery shall not be furnished. Interior
lighting shall be provided. Seat belts shall be installed for each seating position. Outboard seats
shall have combination pelvic and upper torso restraint seat belts. Cab doors shall have windows
with crank-operated window regulators. A rear window shall be provided. Interior lighting shall
be provided.
3.4.13 Steering. Power steering shall be furnished.
*
3.4.14 Windshield wipers and washers. The vehicle shall be equipped with dual
windshield wipers and windshield washers. Windshield wipers shall be multispeed type and
operated by either air or electric motor(s). When specified (see 6.2), and if electric motor wipers
are furnished, intermittent wipers shall be furnished.
17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals