 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62059B(AT)
* 3.1.1.1 Treatment and painting. The vehicle shall be treated and painted in accordance with
MIL-STD-1223. As specified by the procuring activity for the appropriate service (see 6.2), the
exterior color shall be in accordance with MIL-STD-1223.
* 3.1.1.2 Marking and data plates. As specified by the procuring activity for the appropriate
military service (see 6.2), identification marking and data plates shall be in accordance with
MIL-STD-1223. When specified (see 6.2), concealed markings shall be furnished.
* 3.1.1.3 Rustproofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297.
* 3.1.1.4 Brake lights. At least one pair of brake lights shall override the four-way emergency
flasher unless they are independent. Modifications to the manufacturer's standard product to
accommodate this requirement shall not compromise conformance to any Federal Motor Carrier
Safety Regulation referenced herein or to any Federal Motor Vehicle Safety Standard. If
additional lights are added to the vehicle, the lights shall be selected from the chassis
manufacturer's standard matching hardware.
3.2 General design.
* 3.2.1 Federal Motor Vehicle Safety Standards. The vehicle shall comply with all Federal
Motor Vehicle Safety Standards applicable to the type of trailer furnished and in effect on the date
of manufacture.
* 3.2.2 Dissimilar metals. All dissimilar metals used throughout the vehicle shall be insulated
from one another to prevent galvanic or electrolytic action.
3.2.3 Ratings. Vehicle ratings shall be the manufacturer's published ratings. Component and
vehicular ratings shall not be raised to meet the requirements of this specification. When
published ratings are not available, verification of ratings shall be available to the appropriate
engineering office of the procuring activity.
* 3.2.4 Accessibility. The design of the vehicle and optional equipment shall permit access for
routine servicing and shall permit access for replacement and adjustment of component parts and
accessories with minimal disturbance of other components and systems.
* 3.2.5 Prohibited materials. Asbestos materials shall not be used in any form in any part of the
vehicle. No item, part or assembly shall contain radioactive materials in which the specific activity
is greater than 0.002 microcurie per gram or activity per item equals or exceeds 0.01 microcuries.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals