 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62079E
* 2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
* 3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.4, the
vehicle, components, assemblies and accessories to be delivered under the contract shall be
standard or optional items, which meet or exceed the requirements of this specification. All
chassis items shall be as represented in the chassis manufacturer's technical data book. Special
bodies or mounted equipment shall be as represented in the body and equipment manufacturer's
technical data. Technical data shall be limited to specifications and technical material identical
to that furnished to the authorized company representatives for selection of vehicle models and
components, and shall be available to the engineering offices of the procuring activity prior to
delivery of the items. The chassis model furnished shall be not older than the chassis
manufacturer's current model on the date of invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified
in 3.1, the vehicle shall be furnished with special equipment as specified herein.
* 3.1.1.1 Painting and marking. Treatment, painting, marking and data plates shall be in
accordance with MIL-STD-1223. The exterior color and the identification markings shall be in
accordance with MIL-STD-1223 for the military service identified by the procuring activity
(see 6.2). When specified (see 6.2), concealed markings shall be furnished.
* 3.1.1.2 Rusptroofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297. When specified (see 6.2), tropical rustproofing in accordance
with FED-STD-297 shall be provided.
3.1.1.3 Silicone brake fluid. When specified (see 6.2), and if available as the manufacturer's
standard or optional brake fluid, silicone brake fluid conforming to MIL-B-46l76 shall be
provided in the hydraulic brake system. A tag shall be placed near the master cylinder stating
"CAUTION: USE SILICONE BRAKE FLUID ONLY, MIL-B-46176."
3.1.1.4 Brake lights. At least one pair of brake lights shall override the four-way emergency
flasher. Modifications to the manufacturer's standard product to accommodate this requirement
shall not compromise conformance to any Federal Motor Carrier Safety Regulation referenced
herein or to any Federal Motor Vehicle Safety Standard. If additional lights are added to the
vehicle, the lights shall be selected from the chassis manufacturer's standard matching hardware.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals