|
| ![]() MIL-T-62097C
TABLE II. Characteristics and defects. (continued)
Method of
Characteristics
Major defects
inspection
Doors and
Improper fit, not alined, warpage, improper
Visual and
door hardware
application of door seals, improper material,
operational
inoperative door hardware, surface defects
(see 3.5.3 and 3.7.6)
Windows
Sloppy installation of weatherproof seals,
Visual and
windows not easily opened or adjusted to
operational
various positions, defective glass (cracks,
scratches) (see 3.5.3 and 3.7.6)
Interior panels
Unevenness, buckling, gaps, open seams,
Visual
joiners, edgings, and moldings improperly
installed, surface defects (see 3.5.1.6
and 3.7.5)
Floor and floor
Gaps, waviness, cracks, bulges, open seams
Visual
covering
inadequately secured, improper floor covering
material, improper application of sound dead-
ening material (see 3.5.1.5 and 3.7.8)
Stepwells
Hinge cover not flush with interior floor
Visual and
(when applicable), binding or interference
functional
of hinged cover or fold-out stair assembly
(whichever is applicable) damaged, defective
material, improper fit
Electrical
Sloppy or loose connections, improper wiring
Visual and
system
clearances, color code errors, incorrect
functional
capacity of circuit breaker box(es), wiring
not fastened or clipped, incorrect wire size,
faulty materials, faulty solder joints, sloppy
installation, inoperative electrical controls,
noisy (see 3.5.4.1 and 3.7.9)
5. PACKAGING
5.1 Vehicle processing. The vehicle shall be processed for shipment from
manufacturer's plant to initial receiving activity in accordance with the manufacturer's standard
commercial practice.
26
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |