 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62145E
(m)
Gasoline engine, if required (see 3.4.1.2).
(n)
Power plant heaters, if required (see 3.4.1.8).
(o)
If a battery heater is not required (see 3.4.1.8).
(p)
Automatic or semiautomatic transmission, if required (see 3.4.5.3).
(q)
Oil lubricated wheel bearings and axle spindles, if required (see 3.4.9).
(r)
Two-speed axle, if required (see 3.4.9.2).
(s)
Traction control, if required (see 3.4.9.3).
(t)
Wide base tires, if required (see 3.4.10).
(u)
Disc type wheels, if required (see 3.4.10).
(v)
Bias ply tires, if required (see 3.4.10.1).
(w)
A carrier, if required (see 3.4.10.3).
(x)
A spare wheel or rim, if required (see 3.4.10.4).
(y)
Spare tire assembly, if required (see 3.4.10.5).
(z)
A trailer brake control system, if required (see 3.4.11.3).
(aa)
Brake controls for use from a towing vehicle, if required (see 3.4.11.4).
(ab)
Tilting hood and fender assembly, if required (see 3.4.12).
(ac)
Individual driver's and passenger's seats, if required (see 3.4.12).
(ad)
Tools, if required (see 3.4.16.1).
(ae)
Air operated horn in addition to an electric horn, if required (see 3.4.21).
(af)
Fire extinguishers, if required (see 3.4.22).
(ag)
Chassis mounted rear winch for type I, if required (see 3.4.25).
(ah)
Body mounted rear winch for type I, if required (see 3.4.26).
(ai)
Additional floodlights, if required (see 3.5.5.1).
(aj)
Hydraulic fluid conforming to MIL-H-83282, if required (see 3.5.6.4.1).
(ak)
Telescopic ladder, if required (see 3.5.8).
(al)
If roof bows are not required (see 3.6.7).
(am)
If a tarpaulin is not required (see 3.6.8).
(an)
Hydraulic tailgate, if required (see 3.6.10).
(ao)
Rollers, if required (see 3.6.11).
(ap)
Portable ramps, if required (see 3.6.12).
(aq)
Transition plate, if required (see 3.6.15).
6.3 Performance prediction. SAE Truck Ability Prediction Procedure computations and
computations for low speed and maximum geared speed will be required by the contractor. The
SAE Work Sheet item 1 should include vehicle model number, engine model number, and
vehicle type, class and model. Unless other conditions are cited in the contract, computations
should be made for normal atmospheric pressure, normal ambient air temperature, and still dry
air. The factors to be used in predicting truck ability (see 3.3.1.1) are established as follows for
the corresponding SAE Truck Ability Prediction Procedure Tables:
Table 1
-
Tire Factor. This factor must relate to the size of tires
furnished by the contractor in accordance with this
specification.
47
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals