 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62222(AT)
4.4.1 Preproduction inspection. When specified (see 6.2), preproduction vehicle (see 3.1)
shall be inspected at a location approved by the Government, to determine conformance to
requirements of this specification. Inspection shall consist of examination as specified in 4.5.2
and all tests specified in table XIII.
4.4.2 Initial production inspection. When specified (see 6.2) and initial production
inspection shall be performed on no less than two vehicles, selected at random after the
contractor considers the vehicles produced are representative of production parameters.
Inspection shall consist of examination as specified in 4.5.2 and tests as specified in table XIII.
The vehicle shall be road tested for 4000 miles as specified in table XII.
TABLE XII. Four thousand mile test combat loaded
(Government proving ground).
Course
Mileage and speeds
Hard-surface roads
1000 miles at varying speeds up to maximum
Gravel or dirt roads
1000 miles at varying speeds up to maximum
Level, cross-country terrain
1000 miles at varying speeds up to maximum
Hilly, cross-country terrain
1000 miles at varying speeds up to maximum
4.4.3 Production sample inspection. A vehicle produced from production tooling and
assembled using production methods shall be selected at random from the first month production
or the first twenty built, and subjected to the production sample inspection.
4.4.3.1 In-process examination. During fabrication of the initial production vehicle, an
in-process examination be conducted by representatives of TACOM product assurance
directorate to evaluate conformance of materials and workmanship to specified requirements.
Examination will be made at the contractor or subcontractor facility prior to application of
primer and paint. Processing and welding procedures, quality system, and inspection records
will be evaluated during this examination.
4.4.3.2 Completed production sample contractor inspection. The production sample vehicle
shall be road tested and inspected by the contractor as specified in 4.5.3.1, to determine
conformance to contract and specifications. After inspection, the contractor shall submit the
vehicle (and all inspection records and certifications) to the responsible Government
representative at contractor plant for preliminary examination.
4.4.3.3 Preliminary examination. The responsible Government representative shall conduct
a preliminary examination as specified in 4.5.2.2, of the production sample vehicle.
25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals