 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62223B(AT)
3.7.6 Door and window installation. All exterior doors and windows shall be properly
located, fitted and sealed to prevent entrance of air, dust and water. All doors and windows and
associated hardware shall operate without binding. Window curtains shall be the appropriate
color, durable material, free of uneven stitching, crooked seams, runs, tears or color fade and
shall be installed in an orderly fashion.
3.7.7 Installation of insulation. The insulation shall be installed in a manner that will
exclude excessive voids, open spaces, rips, tears and other types of damage or defects. Wherever
practical, the insulation shall be installed prior to the closing of spaces in the body interior. The
insulation shall be installed and secured in a manner to retain the material in a permanent
position under all operating conditions.
3.7.8 Floor installation and floor covering. Galvanized sheet metal used to enclose the
floor area shall be securely installed and free of gaps, open seams, cuts or open holes. All wood
parts shall be free of cracks or splinters and thoroughly treated to provide full and uniform
coverage (see 3.5.4). The material shall be applied uniformly, free of thin or bare areas. The
carpeting shall be installed on the floor surface and fitted without gaps, visible seams, bulges,
frayed edges or color fade.
3.7.9 Electrical system installation. The electrical system installation shall provide
proper routing of electrical wiring with clearances between wiring and applicable parts. All
wiring shall be mechanically and electrically secured, fastened or clipped at points of bending
and protected against chafing and damage. Wiring shall be concealed and easily accessible for
repairs. All circuits shall be properly grounded. Electrical wire covering (insulation) shall be
free of cracks, cuts, kinks, frays or similar defects. All wiring and outlets shall be securely
installed to preclude loose or faulty connections. Wall outlets and electrical fixtures shall be
installed uniformly. All electrical appliances shall be securely mounted and properly positioned
to prevent damage.
3.7.10 Air conditioning and heating system installation. The ceiling mounted ducts shall
be straight and smooth on the inside with joints neatly finished. Ducts shall be anchored
securely and shall be free of vibration and undue noise. Joints and outlet connections shall be
substantially airtight. Laps shall be made in the direction of the airflow. All edges and slips
shall be smooth. Ducts shall be free of dents, nicks, buckling, open seams and deformation. The
adjustable diffusers shall be securely mounted and fitted in a neat straight position. The diffusers
25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals