 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62316B(AT)
shall be as represented in the chassis manufacturer's technical data book. Special bodies or
mounted equipment shall be as represented in the body and equipment manufacturer's technical
data. Cabinets and shelving shall be as specified herein. Technical data shall be limited to
specifications and technical material, identical to that furnished to the authorized company
representatives for selection of vehicle models and components, and shall be available to the
engineering offices of the procuring activity, prior to delivery of the items. The chassis model
furnished shall be not older than the chassis manufacturer's current model on the date of
invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified in
3.1, the vehicle shall be furnished with special equipment as specified herein.
* 3.1.1.1 Painting and marking. Treatment, painting, marking and data plates shall be in
accordance with MIL-STD-1223. The exterior color and the identification markings shall be in
accordance with the requirements of MIL-STD-1223 for the military service identified by the
procuring activity (see 6.2).
* 3.1.1.2 Markings and data plates. As specified by the procuring activity for the appropriate
military service (see 6.2), identification marking and data plates shall be in accordance with
MIL-STD-1223. When specified (see 6.2), concealed markings in accordance with
MIL-STD-1223 shall be furnished.
3.1.1.3 Rustproofing. When specified (see 6.2), the vehicle shall be rustproofed in
accordance with FED-STD-297. When specified (see 6.2), tropical rustproofing in accordance
with FED-STD-297 shall be furnished.
3.1.1.4 Towing devices. Towing devices consisting of two hooks, loops, eyes or pins or the
manufacturer's single center mounted eye or pin shall be mounted on the front of the vehicle.
When specified (see 6.2), in addition, towing devices shall be mounted on the rear of the vehicle.
All towing devices shall be frame rail mounted or reinforced back to each frame rail.
* 3.1.1.5 Lifting and tiedown attachments. When specified (see 6.2), the vehicle shall be
equipped with lifting and tie down attachments. Lifting and tie down attachments shall conform
to type II of MIL-STD-209. In MIL-STD-209, wherever "maximum shipping weight (MSW)"
occurs, replace it with "curb weight." A transportation plate conforming to composition A
(class 1 or 2) or composition C of MIL-P-514 shall be provided. The transportation plate shall
be inscribed with a diagram showing the lifting attachments and proposed lifting slings, the
capacity of each attachment, and the required length and size of each sling cable. A silhouette of
the vehicle showing the center of gravity shall be provided on the transportation plate. Tie down
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals