 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62320C
* 3.4.12.1 Cab interior. Unless otherwise specified, the cab shall have an upholstered, full
width, adjustable seat and back or individual, adjustable, driver's seat and individual passenger
seat. When specified (see 6.2), an individual, adjustable, driver's seat and an individual
passenger seat shall be provided. When specified (see 6.2), the driver's seat shall be the
manufacturer's standard air ride suspension type. The color of the upholstery and the interior
finish shall be compatible with the exterior color (see 3.1.1.1). White upholstery shall not be
provided. Interior lighting shall be provided. Two pairs of seat belts shall be installed.
3.4.12.2 Crew cab. When specified (see 6.2), a four-door full width crew cab shall be
furnished in lieu of the standard, full width cab. The cab shall be equipped with two upholstered,
full width seats and backs. The front seat shall be adjustable. Fastenings and three pairs of seat
belts shall be installed for both front and rear seats. Cab doors shall be equipped with locks
operable from inside the cab through mechanical linkage, with both front doors equipped with
external key operated lock. Cab doors shall have windows with crank operated window
regulators. Interior lighting shall be provided. The cab roof shall be of-one piece construction;
or, if welded, the roof shall give the appearance of one piece with weld seams being continuous,
waterproof, and free of visible seams, bumps, or protrusions. Full length drip moldings shall be
mounted above the doors. When a crew cab is furnished, the cab-to-axle dimension shall be
measured from the back face of the crew cab.
3.4.12.2.1 Crew cab seat. spacing. With the front seat adjusted to the extreme forward
position, there shall be not less than 30 inches, measured in a horizontal plane, between the front
of the rear seat back and the rear of the front seat back. A kick-space height of not less than
2-3/4 inches shall be maintained between the floor and the rear of the front seat in all positions of
adjustment. Leg room and space forward of the front seat shall be equivalent to that provided
ahead of the seat in a two-door standard cab.
3.4.13 Steering. Power steering shall be furnished.
3.4.14 Windshield wipers and washers. The vehicle shall be equipped with dual windshield
wipers and windshield washers. The windshield wipers shall be of the multispeed type, operated
by either air or electric motor(s).
3.4.15 Bumper. Unless the bumper is an integral part of the vehicle cab, a channel type front
bumper shall be provided except when a front mounted winch is furnished (see 3.4.22).
3.4.15.1 Rear end protection. The rear end of the vehicle shall be protected in accordance
with Federal Motor Carrier Safety Regulation 393.86. A rear bumper shall be provided as
specified herein.
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals