 |
|||
|
Page Title:
Special kits installation check |
|
||
| ||||||||||
|
|  MIL-T-62531(AT)
APPENDIX A
Rationale
To assure that all required OVM is on the vehicle, and in its proper location.
Guidance
See applicable installation drawings.
Lessons Learned
4.4.3 Stowed material. See 4.3.1 for inspection requirements.
Verification Rationale
See 4.3.1.
Verification Guidance
See 4.3.1.
Verification Lessons Learned
4.4.1 Special kits installation check. To determine conformance to 3.4.1 through 3.4.2, a
specific kit when furnished shall be installed on vehicle(s), and checked for proper installation or
interference with other components. When installation of kits require permanent change in
vehicle configuration or adaption, such as weldments, drilled holes, metal cutouts, etc., prior
approval must be obtained from the Acquisitioning Contracting Officer. Vehicles with arctic kits
(see 4.4.1.1.1 through 3.4.1.1.7) installed shall be tested in accordance with MIL-STD-810,
method 502.2, procedures I and II.
Verification Rationale
To assure form, fit and function of the special purpose kits, a complete installation of each
type of kit shall be made on the specific vehicle it is intended for.
Verification Guidance
No alteration of vehicles, components or kits shall be permitted during installation without
prior submittal of the applicable engineering documentations and approval of the Contracting
Officer.
43
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals