 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-62735
the component manufacturers. Hydraulic oils shall be approved by the hydraulic pump and
hydraulic system manufacturers for severe service.
3.9.14.1 Lubrication chart. When operation with military lubricants is specified, the
vehicle shall have a lubrication chart (plate) conforming to 3.10.5. The chart shall identify the
interchangeable military and commercial lubricants.
3.9.15. Common locks and keys. When specified (see 6.2), the same key that fits the cab
door locks shall fit the starting (ignition) lock. This same key shall fit the door locks and starting
locks on all vehicles under contract. Two such interchangeable keys shall be furnished with each
vehicle.
3.9.16 Light shut-off switch. When specified (see 6.2) a single switch, in addition to and
not in place of the normal light switches, shall extinguish all vehicle exterior lights and the cab
interior light, as well as any and all body lights. The switch shall be identified in accordance
with 3.10.5.
3.10 Treatment, painting and marking.
3.10.1 Treatment and painting. The complete vehicle shall be treated and painted in
accordance with MIL-STD-1223. As specified by the procuring activity for the appropriate
military service (see 6.2), the exterior color shall be in accordance with MIL-STD-1223. See
MIL-STD-1223 for special painting requirements for vehicles in semigloss and lusterless colors.
3.10.2 CARC. When specified (see 6.2), in addition to the requirements of 3.10.1,
chemical agent resistant coating (CARC) in accordance with Army Drawings 12369024 and
12369025 shall be provided.
3.10.3 Markings and data plates. As specified by the procuring activity for the
appropriate military service (see 6.2), identification markings and data plates shall be in
accordance with MIL-STD-1223.
3.10.4. Hydraulic fluid identification plate. When a body hydraulic system is furnished
and the hydraulic system required fluid replenishment, the vehicle shall have a decal or plate in
accordance with 3.10.5 near the filler cap to identify the type of hydraulic fluid to be used.
3.10.5 Additional decals and plates. Loading charts, operating instructions, switch and
control identification marking and caution notices and warnings and all other equipment
markings specified herein shall be a standard or optional feature with the original equipment
manufacturer (OEM) of that equipment and shall be furnished by that OEM or shall conform to
composition A (class 1 or 2) or composition C of MIL-P-514.
60
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals