 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-63359(AR)
manufactured in the same manner, using the same materials,
equipment, processes and procedures as used in regular
production. All parts and materials, including packaging and
packing, shall be obtained from the same source of supply as
used in regular production.
4.2.1 Government testing. - When the Government is
responsible for conducting first article approval tests, the
contractor, prior to submitting the sample to the Government,
shall inspect the sample to insure that-it conforms to all the
requirements of the contract and submit a record of this
inspection with the sample, including certificates of
conformance for materials.
4.2.2 Contractor testing. - When the contractor is
responsible for conducting first article approval tests, the
sample shall be inspected-by the contractor for all the
requirements of the contract. The sample and a record of this
inspection, including certificates of conformance for
materials, shall be submitted to the Government for approval.
The Government reserves the right to witness the contractor's
inspection.
4.3 Inspection
provisions.
4.3.1 Submission of product. - Unless otherwise specified
by the contracting officer, inspection lot size, lot formation
and presentation of lots shall be in accordance with "Submission
of Product" provisions of MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. - All components and
subassemblies shall be inspected in accordance with the
inspection provisions contained in Supplementary Quality
Assurance Provisions (SQAP) when provided with the Technical
Data Package (TDP). In the absence of SQAP'S, the applicable
Quality Assurance Provisions of MIL-F-13926 shall apply.
4.3.2.2 Final acceptance inspection. - Subsequent to first
article approval, examination and tests related to Section 3
herein shall be performed on a single defect (individual
characteristic) basis in accordance with MIL-STD-105 and the
sampling plans specified in Table I herein. Examination and
tests for Packaging, Packing and Marking shall be in accordance
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals