 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-63535(AR)
3.8.1 Disassembly and inspection. The motor shall show no
evidence of excessive wear damage, burning, galling, or moving
parts, etc.
3.9 Dimensions. Dimensions and tolerances shall be as
specified on drawing 905D490.
3.10 Weight. The maximum weight of the motor shall be 6.8 lbs.
3.11 Color. The color of the motor enclosure shall be black
wrinkle.
3.12 Identification plate. The motor shall be marked as
specified on drawing 905D490.
3.13 Workmanship. Workmanship and finish shall be in
accordance with MIL-STD-454, Requirement 9. Finished items and
parts shall not exhibit faulty material and processing such as
seams, laps, laminations, cracks, visible steps, sharp edges, nicks,
scratches, burrs, foreign matter, deformation, and missing
operations which may affect serviceability operation, or safety.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection and standard quality
assurance provisions. Unless otherwise specified herin or in the
contract, the provisions of MIL-W-63150 shall apply and are hereby
made a part of this detail specification.
4.1.1 Certification provisions. The certification provisions
of MIL-W-63150 shall apply. (See 6.2.1)
4.2 Quality assurance terms and definitions. Quality assurance
terms and definitions used herein are in accordance with MIL-STD-109.
4.3 Classification of inspections. The inspection requirements
specified herein are classified as follows:
a. First Article Inspection (SeE 4.4).
b. Quality Conformance Inspection (see 4.5).
4.4 First article inspection.
4.4.1 Submission. The contractor shall submit five sample
motors for evaluation in accordance with the provisions of 4.4.2.
4.4.2 Inspection to be performed. See Table I herin.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals