|
| ![]() MIL-T-70521A(AR)
4.4.2.1 Components, assemblies and subassemblies. All
components, assemblies, and subassemblies shall be inspected in
accordance with the inspection provisions contained in this speci-
fication and the Quality Assurance Provisions (QAP) listed In the
Technical Data Package (TDP). In the absence of QAPS, the
applicable quality assurance provisions of MIL-F-13926 shall apply.
4.4.2.2 Final acceptance inspection. Subsequent to first
article approval, examination and tests related to Section 3 herein
shall be performed on a single defect (Individual characteristic)
basis in accordance with the sampling plans specified in 4.4.2.3
herein. Examination and test for packaging and marking shall be in
accordance with Section 5 herein. The tabulated classification of
defects in 4.4.2.3 shall constitute the minimum inspection to be
performed by the contractor after first article approval and prior
to Government acceptance or rejection of item or lot.
4.4.2.3 Functional tests. The tests in Table II shall be
performed on a 100% basis.
4.5 Special sampling. One telescope out of the first 50
produced and one out of each 100 produced thereafter shall be
slected at random. The sample shall have met the requirements and
tests of Table II and shall then meet the tests in Table III.
Unless otherwise specified in the contract the items shall be
returned to the lot upon successful completion of testing.
9
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |