 |
|||
|
Page Title:
Submission of contractor inspection equipment designs |
|
||
| ||||||||||
|
|  MIL-T-70521A (AR)
5.
PACKAGING
5.1 General. Preservation, packing, and marking shall be in
accordance with Packaging Data Sheet PS 9360257. The level of
protection shall be as specified in the procurment document.
6.
NOTES
(This section contains information of a general or explanatory
nature that may be helpful, but is not mandatory.)
6.1 Intended use. The Telescope, Elbow, 9360257, is used with
the Mount Telescope, 9360169. These two items compose the
Sightunit, 9360168, M64A1 which is used with the U.S. Army mortar
systems.
6.2 Acquisition
requirements. Acquisition documents must
specify the following:
a. Title, number and date of this specification.
b. Issue of DODISS to be cited in the solicitation, and
if required, the specific issue of individual documents
referenced (see 2.1.2).
c. Requirements for submission of first article sample.
d. Applicable stock number.
e. Packaging requirements, if other than specified in
Section 5.
f. Serialization requirements, if applicable.
g. Certificate of conformance for each lot or shipment of
product.
6.3 Submission of contractor inspection equipment designs for
approval. Submit two copies of designs as required to: Commander,
U.S. Army AMCCOM, ATTN: SMCAR-QAF-I, Picatinny Arsenal, NJ 07806-
5000. This address will be specified on the Contract Data Require-
ments List, DD Form 1423, in the contract.
6.4 Drawings. Drawings listed in Section 2 of this specifica-
tion under the heading U.S. Army Armament Research, Development, and
Engineering Center (ARDEC), may also include drawings prepared by,
and identified as U.S. Army Armament Research and Development
Command (ARRADCOM), Frankford Arsenal, Rock Island Arsenal or
Picatinny Arsenal drawings. Technical data originally prepared by
these activities is now under cognizance of ARDEC.
16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals