 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-740G
3.3.4 Stowed material. Original equipment material (OEM) items shall be stowed on the
vehicle in the spaces provided to assure that items will not interfere with other components and
operation of the vehicle.
3.3.5 Engines. Engines, when installed in group 1, 2, and 3 vehicles, shall be in accordance
with the following:
a. Group 1, Gasoline engines, Ordnance Drawing 10883507.
b. Group 2, Multi-fuel engines, LDS-465-1A and 1; - DAPD-292.
c. Group 3, Diesel engines; NHC-250 and ENDT-673; - ATPD-2023.
3.3.6 Heaters and air conditioners (truck, van: expansible).
3.3.6.1 Heaters. Two multi-fuel burning space heaters shall be furnished and installed on
trucks, van, expansible, M291A1, M291A1D, M2191A2, M291A2C, M291A2D, M291A2F,
M820, M820A1 and M820A2, in accordance with applicable TDP requirements.
3.3.6.1.1 Air flow modulation. Air inlet damper shall be provided to control the percentage
of circulating air mixture.
3.3.6.2 Air conditioner. Provisions shall be made so that a 36,000 British thermal unit per
hour (Btu/hr), air conditioner can be installed on vehicles listed in 3.3.6.1, in accordance with
applicable TDP requirements.
3.3.7 Winches. Winches, controls and equipment, installed in accordance with applicable
drawings on vehicles requiring winches, shall supply power to retrieve disabled equipment under
all climatic conditions. The winch and controls shall supply power for the operation of wrecker
equipment.
3.3.8 Lubrication fittings. All surfaces requiring lubrication shall be provided with
lubrication fittings.
3.3.9 Wrecker crane and controls. Wrecker crane and controls, constructed and installed in
accordance with specified drawing, shall operate without malfunction throughout all ranges of
operation, under all operating conditions.
3.3.10 Truck, bolster, logging (M748A1 w/winch, M748A2 w/winch, and M815 w/winch.
Truck, bolster, logging M748A1 w/winch, M748A2 w/w and M815 w/w shall consist of a body,
bolster, logging, constructed in accordance with specified drawings and mounted on a M40A1,
M40A2 w/w or M809 w/w truck chassis.
3.3.11 Truck, stake, bridge transporting (M328A1, M328A2 w/winch and M821 w/winch.
Truck, stake, bridge transporting M328A1, M328A2 w/w, and M821 w/w, shall consist of a
body, stake, bridge transporting, constructed in accordance with specified drawings and mounted
on an M139Al, M139A2 w/w or M812 w/w truck chassis.
3.3.12 Drop-side cargo body. Drop-side cargo body, constructed in accordance with
specified drawings, shall consist of sides and tailgate, that can be either rotated on hinges or
removed to permit access to the cargo bed floor area from three sides of the vehicle.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals