 |
|||
|
|
|||
| ||||||||||
|
|  DRAWINGS
Bureau of Naval Weapons
Test Set, Missile Electrical System,
BUWEPS LD 477269
Mark 363 Mod 3 and all documents
listed thereon
PUBLICATIONS
Bureau of Naval Weapons
BUWEPS OD 13776
Test Set, Missile Electrical System,
Revision 1
Mark 363 Mod 3 Factory Acceptance Test
CHANGE 3
(Copies of specifications, standards, drawings, and publications required
by the supplier in connection with specific procurement functions should
be obtained from the procuring activity or as directed by the Contracting
Officer.)
REQUIREMENTS
3.
3.1 Description. The Test Set simulates an entire missile electrical
system. This includes basic functions of the Range and Airframe Separation
Programmer and Selection of Initial Search Depth and Floor Depth, which are
functions of the torpedo. In service use, the Test Set is connected to the
launcher to provide to the weapon system responses which will test the sys-
tem circuits, and also check the system for safety.
3.2 General Requirements
3.2.1 Materials and Treatments of Materials and Parts. All materials,
treatments, and parts used in the manufacture of the Test Set shall be of
such quality as to enable the Test Set to meet the requirements herein.
3.2.2 Gages. The supplier shall provide those gages necessary and
adequate to assure that the Test Set will meet dimensions and requirements
shown on the applicable documents listed in LD 477269. When requested by
the supplier, the procuring activity may furnish existing, pertinent drawings
of Naval final inspection gages for use only in the designing of the suppliers
gages. This action does not relieve the supplier of the responsibility for
designing and manufacturing the gages needed for the fulfillment of the con-
tract.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals