 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
Reference Designation
Function
Test Point: TUN MOT DR (Tuning Motor
J17
Drive )
Test Point: STBD-ROLL CMD (Starboard
J18
Roll Command
J19
Test Point: PORT ROLL CMD (Port
Roll Command)
Test Point: 28V
DELAYED
J20
J21
Test Point: SIG GND (Signal Ground)
3.4.1.6.3.3.6.6 Test Outputs.
The Test Panel shall provide the output
simulations listed below.
3.4.1.6.3.3.6.6.1 Limit Voltage.
The following voltages shall be simulated
from a 12kn + 1O percent source impedance. The MNL TEST PRGM switch,
and other switches, shall select the voltage to be supplied.
(a) +4. 1 *O. 08 Vdc for AIM-7D/7E series of missiles
(b) -4.1 + O. 08 Vdc for AIM-7D/7E series of missiles
(c) +7.9 + O. 16 Vdc for upper limit NO GO test
(d) -7.9 + O. 16 Vdc for upper limit NO GO test
(e) +10.2 + O. 2 Vdc for AIM-7F series of missiles
3.4.1.6.3.3.6.6.2 AFC Voltages.
The following voltages shall be simu-
lated from a 75kn + 1O percent source" impedance. The MNL TEST PRGM
and AFC/LIMIT NO GO switches shall select the one to be applied.
(a) +1.4 + 0.06, -0 Vdc (increasing from O)
(b) -(1. 4 + 0.06, - O) Vdc (increasing from O)
(c) +2.2 + O. 04 Vdc (increasing from O)
(d) -2.2 + O. 04 Vdc (increasing from O)
(e) +1.O + 0.04, -0 Vdc (decreasing toward O)
(f) -(1.0+0.04, - O) Vdc (decreasing toward O)
3.4.1.6.3.3.6.6.3 Recycle.
The voltages shall be simulated from a source
impedance of 150kn + 1O percent.
The MNL TEXT PRGM and Recycle NO GO
switches shall select which is to be applied.
38
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals