 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81527B(AS)
3.4.1.6.3.3.8.4 Indicator Lights. The following white Indicator Lights shall
be mounted on the front panel to indicate when the respective circuits in the
radar are energized with +28 Vdc.
(a) INTEGROG #1
(b) INTEGROG #2
(c) T C CMD
(d) LONG RANGE DISPLAY ENABLE
3.4.1.6.3.3.8.5 Test Points. The following front panel test points shall
provide a monitoring point for the respective signals within the radar:
(a) PRE TRIGGER #l - The cable for this signal shall be terminated
in 91 ohms and 100 pF.
(b) RDR TRIGGER (Radar Trigger) - The cable for this signal shall
be terminated in 91 ohms.
(c) PULSE RDR VIDEO (Pulse Radar Video) - The cable for this
signal shall be terminated in 91 ohms and 100 pF
(d) t PULSE - The cable for this signal shall be terminated in
o
91 ohms and 100 pF.
(e) WARNING PULSE - The cable for this signal shall be terminated
in 91 ohms and 100 pF.
The cable for this signal shall
(f) EARLY R GATE (Early Range Gate) -
be either terminated in 91 ohms and 100 pF or returned on the video lines
as they are exercised per 3.4.1.6.3.3.8.3 (a).
(g) SIGNAL GRD
A test signal shall be provided as follows:
3.4.1.6.3.3.8.6 Test Signal.
(a) EL STROBE JITTER - This signal shall be provided from a -6 Vdc
input through a 15 kohm + 1%, 1/8 W resistor.
41
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals