 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-81785C(AS)
3.6.4.3 Counter/timer. A counter/timer, Hewlett-Packard 5326B/001/011,
or equivalent, shall be supplied and shall provide capability to perform the
Synchronizer-Transmitter SN-487( )/AWG-9 and Converter, Signal Data CV-
2946( )/AWG-9, CV-3224( )/AWG-9 and CV-3366( )/AWG-9 time interval measure-
ments.
3.6.4.4 Frequency counter. A frequency counter, Systron-Dormer 6316A-29,
or equivalent, shall be supplied and shall provide capability to perform
frequency measurements (primarily X-band frequencies) .
3.6.4.5 Digital multimeter. A digital multimeter, Systron-Dormer 9340-5B,
or equivalent, shall be supplied and shall provide capability to perform ac
and dc voltage measurements, and resistance measurements.
3.6.4.6 Frequency re sponse analyzer. A frequency response analyzer,
EMR Hatboro 1410 AR-1, or equivalent, shall be supplied and shall provide
capability to perform the Converter, Signal Data CV-2946( )/AWG-9, CV-3224( )/
AWG-9, CV-2950( )/AWG-9, CV-3225( )/AWG-9 and CV-3366( )/AWG-9 polar error
phase shift measurements.
3.6.4.7 Range simulator. The range simulator, Instrumentation Technology
Corporation 9007, or equivalent, shall be supplied and shall provide cap-
ability to perform the Converter, Signal Data CV-2946( )/AWG-9, CV-3224( )/
AWG-9 and CV-3366( )/AWG-9 dynamic tracking tests.
3.6.4.8 Generator, Reference Signal SG-1014( )/AWM-23(V).
The reference
signal generator shall provide the following capabilities:
a.
Comparison of signals from the speed tracker portion of the
Converter, Signal Data CV-2950( )/AWG-9 and CV-3225( )/
AWG-9 to provide a GO/NO GO output.
Processing pulse and frequency modulated signals at the radar
b.
IF center frequency and inversion of the frequency domain
spectrum along the frequency axis. The IF spectrum inverter
shall be used to test Synchronizer-Transmitter SN-487( )/AWG-9.
In addition, a pulse delay capability shall be included.
.
3,6.4.9 Power Supp ly PP-6848( )/AWM-23(V). The power supply shall provide
the capability to supply dc voltages to WRAs and RFTS circuits, using a single
dc power supply as a source (3.6.4.10]. The power supply shall also provide
the capability to sense the output power forms for overvoltage, undervoltage,
and overcurrent for RFTS and WRA protection as well as for continuous monitor
capability.
3.6.4.10 power Supply, dc. The dc power supply, Lambda LB706-FM-3632, or
equivalent, shall provide the capability to supply 200 Vdc at 10 amperes
to Power Supply PP-6848( )/AWM-23(V).
3.6.5 Accessories - RFTS. The RFTS accessories shall be composed of items
not permanently attached to the RFTS.
-20-
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals