 |
|||
|
Page Title:
Hoisting instructions for heavy trainers |
|
||
| ||||||||||
|
| MlLT81821
When hard outer cover handles are provided, which are not
3.3.3.18 Cover handles.
suitable for hoisting or cargo plane tiedown attachment, the following legend shall be centrally
located above the handles on each side or end of the cover in red Ietters approximately 1 inch in
height:
WARNING
FOR LID LIFT ONLY
Hoisting instructions for Iifting a heavy
3.3.3.19 Hoisting instructions for heavy trainers.
trainer shall be stenciled on the cover, including lifting points, need for spreader bar, and area for
forklifting. A heavy trainer shall be defined as having a weight exceeding the one-man lift values of
Table X in Paragraph 5.9.11 .3.2 of MlLSTD1472.
All safety hazards shall be provided with adequate and
3.3.3.20 Safety marking.
conspicuous warning signs. Signs designed in accordance with 3.3.6.1 herein shall display the words
STAND CLEAR in 1/2-inch high white letters on red translucent material. Trainers generating
electromagnetic radiation shall have the minimum safe distances identified and marked.
3.3.3.21 Emergency power control switch marking.
The emergency power control switch
on each trainer shall be labeled with the words ''EMERGENCY POWEROFF" in one-half (1/2)
inch high white Ietters on a red background.
3.3.3.22 Special Control marking.
All special trainer controls shall be labeled "TRAINER
CONTROLS" "NOT USED ON OPERATIONAL SYSTEMS".
3.3.3.23 Marking for shipment and storage.
All trainer equipment shall be marked for
shipment and storage in accordance with MILSTD129.
Trainer panels, including all parts and accessories thereof, and related
3.3.4 Workmanship.
items, shall be manufactured and finished in a manner to enhance the acceptability of the product.
All welding shall be accomplished in accordance with MILW8604 and MILW8611, as
applicable. After final assembly, all items shall be thoroughly cleansed of loose, spattered, or excess
solder, metal chips, and other foreign material. All surfaces shall be clean and free from smudges
scratches, or other marks detracting from a new appearance. Touchup of minor imperfections shall
be accomplished prior to acceptance of the trainer panels. Dimensions and tolerances not specified
shall be as close as is consistent with the best shop practices. Where dimensions and tolerances affect
the interchangeability, operation, or performance of the system, subsystem, or equipment, they
shall be limited accordingly.
41
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals