 |
|||
|
|
|||
| ||||||||||
|
| MILT81821
Dust and security covers.
Dust and security covers shall be provided for each
3.7.5.3
trainer panel requiring protection against damage due to collection of dust during periods of nonuse
and for each trainer panel that contains classified components. These covers shall be fabricated of a
suitable light-weight fabric material, conforming to MILC10799 and shall be designed to fit the
individual trainer panel in both the shipping and operating configuration. Corners and points of
stress shall be reinforced to assure maximum strength and durability. Covers shall be fitted with
zippers where required to permit ease of installation and removal. Suitable fasteners shall be
provided where required to secure the cover to the trainer panel.
3.7.6 Working platform.
Where support of personnel is required fourteen (14) inches or
more above the floor, a built-on platform or appropriate workstand shall be provided `which shall be
safety-engineered for the planned loads. The procedures described in MlLSTD882 shall be used
to minimize potential hazards to reduce the possibility of personnel injury. Platforms or workstands
shall include uniformly spaced nonslip surface steps with firmly anchored guard rails on both sides
and along any perimeter of the platform not otherwise protected. The steps shall have from seven
(7) to ten (10) inches rise with treads a minimum of eighteen (18) inches in width and four (4)
inches in depth.
58
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals