|
| from the procuring activity or as directed by the contracting officer).
REQUIREMENTS
3.
This specification makes provision for preproduction
3.1 Preproduction.
testing of three Test Sets.
3.2 Parts and Material. In the selection of parts and material, fulfillment
In so doing, the
of major design objectives shall be the prime consideration.
following shall govern:
a. Parts and material as approved by MIL-T-28800 shall be given first
consideration.
b. When the characteristics of standard MIL parts and materials are such
that their use will not fulfill the requirements, substitute material and
parts shall be used only with the approval of the cognizant AIM-9 Missile
Service Engineering Activity in accordance with MIL-T-28800.
3.2.1 All electrical connectors shall be in accordance with MIL-C-5015. All
cable and wire shall conform to MIL-C-3432, Class MG, Flexibility F. Cable
sleeving shall be used and shall meet the requirements of MIL-T-631, Type F,
Subform Ua, Grade A, Class I, Category I. Black sleeving should be used to
provide a neat appearance.
3.3 Design and Construction.
The dimensions and physical layout of the Test Set
3.3.1 Configuration.
shall be in accordance with Air Force (AF) Drawings 7032757 and 7032758.
3.3.2 Design References. Drawings 7032757, 7032758, 7032760, 7130520 and
7130534 shall also be used as references and guides for design of the Test
Set. This equipment shall meet all applicable design and construction
requirements of MIL-T-28800 for Class 2 equipment, except as otherwise
specified herein.
The following assemblies are covered by this
3.3.3 Assemblies.
specification:
3.3.3.1
Test Set.
The Test Set shall include the following assemblies:
Aircraft Arming Circuit Simulator with Case, SM-419/A.
a.
Power Cable Assy., Test Equipment, SM-419/A.
b.
Special Purpose Assemblies.
Optional special purpose assemblies are:
3.3.3.2
Special Purpose Cable Assembly CX11066/U for Launcher Adapter Type VI.
a.
Special Purpose Cable Assembly CX11068/U for Testing Red Dog Launcher.
b.
3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |