 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-85342A(AS)
2.2 Other publications. The following document(s) form a part of this
specification to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted shall be those listed in the
issue of the DoDISS specified in the solicitation. Unless otherwise
specified, the issue of the documents not listed in the DODISS shall be the
issue of the nongovernment documents which is current on the date of the
solicitation.
AMERICAN WELDING SOCIETY, INC.
*
D1.1-85
Structural Welding Code, Steel
(Application for copies should be addressed to the American Welding
Society Inc., 550 N.W. LeJeune Road, P.O. Box 351040, Miami, FL 33135.)
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein (except for associated
detail specifications, specification sheets or MS standards), the text of this
specification shall take precedence. Nothing in this specification, however,
shall supersede applicable laws and regulations unless a specific exemption
has been obtained.
REQUIREMENTS
3.
3.1 Design and construction.
3.1.1 Construction. The trailer shall be manufactured in accordance with
Data List DL1223AS100 and all documents listed thereon.
3.1.2 Welding. All welding shall be in accordance with AWS DI.1-85, or
MIL-M-8611 as applicable.
Welding shall be performed by personnel qualified under
3.1.2.1 Welders.
MIL-STD-248.
3.1.2.2 Welding Inspection. During fabrication, all welding shall be
inspected in accordance with MIL-I-6868 by personnel qualified under
MIL-STD-410.
*
3.1.3 Lubrication. The trailer shall be lubricated with grease
MIL-G-10924, or lubricating oil MIL-L-2104, or VV-L-8OO as applicable.
3.2 Performance requirements.
*
3.2.1 Proof load. The trailer when supported by its running gear, shall
pounds.
withstand a proof load of 7000
3.2.2 Brake system.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals