 |
|||
|
Page Title:
Unit Heater, Aircirculating, Steam (Shipboard Use) |
|
||
| ||||||||||
|
|  MIL-U-17293D(SH)
9 September 1983
SUPERSEDING
MIL-U-17293C(SHIPS)
15 January 1973
(See 6.6)
MILITARY
SPECIFICATION
UNIT HEATER, AIR-CIRCULATING, STEAM
(SHIPBOARD USE)
This specification is approved for use by the Naval Sea Systems Command,
Department of the Navy, and is available for use by all Departments and
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers steam unit heaters for use in
heating spaces on Naval ships.
1.2 Classification. Unit heaters shall be of the following classes and
sizes, as specified (see 6.2.1).
Class 1
-
Standard construction.
Nonmagnetic construction.
Class 2
-
18,000 British thermal units per hour (BTU/HR) capacity.
Size 11
-
Size 12
-
30,000 BTU/HR capacity.
Size 13
-
46,000 BTU/HR capacity.
Size 14
-
74,500 BTU/HR capacity.
Size 15
-
116,000 BTU/HR capacity.
Size 16
-
186,500 BTU/HR capacity.
APPLICABLE DOCUMENTS
2.
2.1 Government documents.
2.1.1 Specifications and standards. Unless otherwise specified, the
following specifications and standards, of the issue listed in that issue of
the Department of Defense Index of Specifications and Standards (DoDISS)
specified in the solicitation, form a part of this specification to the extent
specified herein.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy,
Washington, DC 20362 by using the self-addressed Standardization Document
Improvement Proposal (DD Form 1426) appearing at the end of this document
or by letter,
FSC 4520
*U.S.GOVERNMENT PRINTING OFFICE: 1983--605-034/4556
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals