 |
|||
|
|
|||
| ||||||||||
|
|  MIL-V-155BB
4.6.5 Service tests (for shipboard application). Service tests shall be made onboard
ship or in a simulated shipboard metal lation for a period of not less than 6 months or a
period determined satisfactory by the NAVSEC to determine suitability for Military use.
The preservation, packaging, packing and
#
5.
PREPARATION FOR DELIVERY
(The preparation for delivery requirements specified herein apply only for direct Gov-
#
ernment procurements. For the extent of applicability of the preparation for delivery re-
quirements of referenced documents listed in section 2, see 6.4.)
5.1 Preservation and packaging.
Preservation and packaging shall be level A or C as
#
specified (see 6.1).
5.1.1 Level A.
--
.
#
Valves shall be preserved and packaged in accordance with level A
5.1.1.1 Valves.
#
of MIL-V-3.
5.1.1.2 Operating mechanisms. Electrical and mechanical operating mechanisms and
#
associated parts thereto shall be packaged level A of MIL-E-17555 or MIL-R-196, except that
package testing and packaging information such as drawings or other technical data annotated
in MIL-E-17555 is not required.
5.1.2 Level C. Valves and valve mechanisms shall be packaged to afford protection
#
against corrosion, deterioration and physical damage from the supply source to the first
receiving activity for immediate use. The suppliers normal preservation and packaging
methods may be used when such meets the requirements of this level.
5.2 Packing.
Packing shall be level A, B or C as specified (see 6.1).
#
5.2.1 Level A and B.
#
5.2.1.1 Valves. Valves preserved and packaged as specified shall be packed level A
#
or B as specified 6.1) in accordance with MIL-V-3.
5.2.1.2 0perating
Electrical and mechanical operating mechanisms packaged
#
A or B of MIL-B-17555 or MIL-R-196 as applicable. Unless
as specified s a
otherwise specified (see 6.1) , the rough handling tests of MIL-E-17555 are not required.
#
5.2.2 Level C. Valves and valve mechanisms packaged as specified shall be packed in
a manner to insure carrier acceptance and safe delivery at destination at the lowest rate.
Containers, packing or method of shipment shall comply with Uniform Freight and National
Motor Freight Classification Rules or other carrier rules as applicable to the mode of
transportation.
#
5.2.3 Repair parts and special tools. Electrical and mechanical repair parts and
special tools shall be preserved and packaged level A or C, packed level A, B or C in
accordance with MIL-E-17555 or MIL-R-196 as applicable.
#
5.2.4 Technical manuals. Technical manuals which accompany shipments that are packed
level A or B shall be packaged in transparent waterproof plastic bags, minimum 4 mil thick.
Technical manuals shall not be placed within any sealed flexible barrier material used to -
enclose the item(s). For equipment in multiple shipping containers, the manuals accompany
ing the equipment shall be packed in the shipping container housing the main unit. Techni -
cal manuals, when shipped in bulk quantities, shall not be individually wrapped, but shall
be packed in accordance with the requirements of the applicable technical manual specifi-
cation or packed in containers conforming to the requirements of level A, B or C in accord-
ance with MIL-V-3, as specified (see 6.1).
5.3 Marking.
In addition to any special marking required by the contract or order,
#
interior packages and exterior shipping containers shall be marked in accordance with
MIL-STD-129.
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals