1. Allowable reseat leakage 10
per minute maximum with maximum
fluid viscosity of 75 centistokes.
2. Surface roughness shall not exceed 125 microinches in accordance
with ANSI B46.1. Remove all burrs and break sharp edges 0.005
3. Material shall be in accordance with MIL-V-24694.
4. Rated flow shall be 150 liters per minute.
The part number shall consist of the basic number of this specifi-
cation sheet, plus the applicable class letters selected from
table I, and the adjustment type dash letters selected from
table II. For valves whose pressure range covers more than one
class, the letters designating the minimum and maximum settings
are used to form the part number.
Valve with a pressure range of 3.5 to 5 bar,
M24694/1-CE-IN Valve with a pressure range of 3.5 to 10 bar,
Navy - SH