 |
|||
|
Page Title:
Surface Texture Surface Roughness, Waviness and Lay |
|
||
| ||||||||||
|
|  MIL-V-24694(SH)
(Copies of specifications and standards required by contractors in connec-
tion with specific acquisition functions should be obtained from the contracting
activity or as directed by the contracting activity.)
2.2 Other publications. The following documents form a part of this speci-
fication to the extent specified herein. Unless otherwise specified, the issues
of the documents which are DoD adopted shall be those listed in the issue of the
DoDISS specified in the solicitation. Unless otherwise specified, the issues of
documents not listed in the DoDISS shall be the issue of the nongovernment docu-
ments which is current on the date of the solicitation.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
B46.1 - Surface Texture Surface Roughness, Waviness
and Lay. (DoD adopted)
Application for copies should be addressed to the American National
Standards Institute, Inc., 1430 Broadway, New York, NY 10018.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
A 582 - Standard Specification for Free-Machining Stainless
and Heat-Resisting Steel Bars, Hot-Rolled or Cold-
Finished.
(DoD adopted)
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
(Nongovernment standards and other publications are normally available
from the organizations which prepare or which distribute the documents. These
documents also may be available in or through libraries or other informational
services.)
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein (except for associated detail
specifications, specification sheets or MS standards), the text of this specifi-
cation shall take precedence. Nothing in this specification, however, shall
supersede applicable laws and regulations unless a specific exemption has been
obtained.
REQUIREMENTS
3.
3.1 Specification sheets. The individual valve requirements shall be as
specified herein and in accordance with the applicable specification sheet. In
the event of any conflict between the requirements of this specification and
the specification sheet, the latter shall govern.
Valves furnished under this specification shall be
3.2 Qualification.
products which are authorized by the qualifying activity for listing on the
applicable qualified products list at the time set for opening of bids (see 4.3
and 6.3).
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals