 |
|||
|
|
|||
| ||||||||||
|
| MIL-V-24695/3A(SH)
NOTES:
1.
Reverse (compression) buttress thread shall be as specified herein and as
shown in figure 1 of MIL-V-24695/1.
Adapter thread:
Major Dia:
12.265 - 12.375
(external)
Pitch Dia:
11.725 - 11.835
Minor Dia:
11.025 - 11.135
2.
Dimensions are in millimeters.
3.
Tolerances plus or minus 0.5 mm except as noted.
4.
Remove burrs and break sharp edges.
5.
Material shall be in accordance with the general specification.
REQUIREMENTS:
1.
Fluid openings shall be sealed before packaging by the use of caps and plugs
in accordance with MIL-C-5501.
2.
Adapter shall have a locking elastomer ring inserted between the hex stock
and reverse buttress threads to dampen shock and vibration.
Part Number:
The part number shall consist of the basic number of this
3.
specification sheet followed by a dash number as specified in Table I,
indicating end fitting.
EXAMPLE:
- Adapter with 0.438-20 UNF Thread Fitting per ANSI B1.1.
H24695/3-1
2 of 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals