 |
|||
|
Page Title:
Finishes, coatings, construction, and dimensions |
|
||
| ||||||||||
|
|  MIL-V-82466(OS)
NATIONAL BUREAU OF STANDARDS PUBLICATION
Handbook H28
Screw-Thread Standards for Federal
Services
(Application for copies should be addressed to the Superintendent of
Documents, Government Printing Office, Washington, DC 20360.)
3.
REQUIREMENTS
3.1 Preproduction samples. Unless otherwise specified in the con-
tract or order, preproduction samples of the VAND System shall be manu-
factured using the methods and procedures proposed for production. The
sample will be tested as specified in Section 4 and is for the purpose
of determining, prior to production, that the contractor's production
methods are capable of yielding items that comply with the technical
requirements of the contract.
3.2 General requirements
3.2.1 Materials. Unless otherwise specified in the contract, requisi-
tion, or order, all materials and purchased parts entering into the
final assembly of the VAND System shall conform strictly to the detailed
requirements indicated on the drawings and specifications listed in
LD 620161.
3.2.2 Finishes, coatings, construction, and dimensions. Finishes,
coatings, construction, and dimensions for the VAND System shall be
strictly in accordance with the applicable drawings, specifications, and
publications listed in LD 620161.
3.2.3 Moisture, fungus , and corrosion. The VAND System shall be ren-
dered moisture, fungus, and corrosion resistant in accordance with the
requirements of OS 6341.
3.2.4 Marking. Marking of assemblies, subassemblies, and parts shall
be in accordance with the applicable drawings listed in LD 620161.
3.2.5 Interchangeability. Component parts of assembled units (unless
otherwise specified on applicable drawings) fabricated in strict agree-
ment with their applicable drawings shall be interchangeable and shall
assemble with mating components of the unit without selection of fitting.
If, during assembly of the fabricated parts of a unit, selection or
fitting is required and changes in dimensions are necessary, no changes
in the parts as delineated on applicable drawings will be made without
prior revisions and correction of the applicable drawings.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals