 |
|||
|
|
|||
| ||||||||||
|
| MIL-W-14979
4.2.4.2 Supply and maintenance. - Supply and maintenance of
the equipment listed on the ET shall be in accordance with
Specification MIL-I-45607.
4.2.4.3 Government use of contractor's inspection and test
equipment. - The contractor shall make available to the Government
all inspection and test equipment necessary for determining con-
formance with contract requirements. Personnel for operating the
equipment and verification of its accuracy shall be supplied by
the contractor for the performance of examination or test by the
Government.
4.3 Hydrostatic Test Method and Procedure - (see 4.2.3). -
The metal parts assembly shall be hydrostatically tested using
equipment capable of performing the test accurately and consistently.
In performing the test, the pressure will be applied gradually until the
required minimum pressure is reached, after which the pressure
will be held for a minimum of one second. The equipment shall
be calibrated prior to the start of each day's operation, at
intervals of not over 2 hours of continuous operation, and prior
to restarting the operation after a layoff of 1 hour or more.
PREPARATION FOR DELIVERY
5.
5.1 Packaging and marking-Level C. - The warhead shall be
packaged and marked in accordance with Military Specification
MIL-P-10025.
5.2 Packing and marking-Level C. - The packaged warheads
shall be packed and marked in accordance with Military Specifi-
cation MIL-P-10025.
6.
NOTES
6.1 Ordering data. -Procurement documents shall specify the
following:
a. Title, number and date of this specification.
b. Data cards. - Data cards shall be prepared for
each lot in accordance with the information specified in
Standard MIL-STD-1167.
6.2 Inspection code numbers. -The five digit code numbers
assigned to the inspections herein are to facilitate future data
collection and analysis by the Government.
6,3 Inspection equipment. - The contractor shall design
inspection equipment as required by the referenced inspection
Equipment Lists (EL) in accordance with the instructions of
paragraphs 6.3.1 through 6.3.5.
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals