 |
|||
|
|
|||
| ||||||||||
|
| MIL-W-215D
ANSI STANDARDS
Z129.1 - Hazardous Industrial Chemicals - Precautionary Labeling
(Application for copies should be addressed to the American National Standards Insti-
t u t e , Inc., 1430 Broadway, New York, NY 10018.)
ASTM STANDARDS
D1500- ASTM Color of Petroleum Products
(Application for copies should be addressed to ASTM, 1916 Race Street, Philadelphia,
PA 19103.)
(Non-Government standards and other publications are normally available from the
organizations that prepare or distribute the documents. These documents also may be
available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this document
and the references cited herein, the text of this document takes precedence. Nothing in
this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3. REQUIREMENTS
3.1 Appearance. WP shall be a solid having a waxy luster with no visual black
particulate matter when tested as specified in 4.2.4.1.
3.2 Color. WP shall have a color no darker than 2.5 on the ASTM color scale when
tested as specified in 4.2.4.2.
3.3 Melting point. WP shall have a melting point of no less than 43.9C when tested
as specified in 4.2.4.3.
3.4 Insoluble matter in toluene. WP shall contain no more than 0.03 percent by
w e i g h t of insoluble matter in toluene when tested as specified in 4.2.4.4.
3.5 Material Safety Data Sheets. Material Safety Data Sheets for WP shall be pre-
pared in accordance with 48 CFR 52.223-3 by the contractor and shall comply with the
provisions of 29 CFR 1910.1200 and Fed. Std. No. 313 (see 6.6). In the event of a con-
flict, 29 CFR 1910.1200 shall take precedence.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals