 |
|||
|
Page Title:
Standard Qualification Procedures of the American Welding Society |
|
||
| ||||||||||
|
|  MIL-W-43001F
AMERICAN WELDING SOCIETY CODE
Standard Qualification Procedures of the American Welding Society
(application for copies should be addressed to the American Welding Society,
345 East 47th Street, New York, NY 10017.)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS CODE (AWE)
Welding Qualifications of the American Society of Mechanical Engineers
(Application for copies should be addressed to the American Society of
Mechanical Engineers, 345 East 47th Street, New York, NY 10017.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
A 167
- Stainless Steel and Heat-Resisting Chromium-Nickel
Steel Plate, Sheet and Strip
A 176
- Stainless and Heat-Resisting Chromium Steel Plate,
Sheet, and Strip
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
- Safety Requirements for Commerical Laundry and
ANSI 28.1
Dry-Cleaning Equipment and operations
(Application for copies should be addressed to the American National Standards
Institute, Inc., 1430 Broadway, New York, NY 10018.)
(Technical society and technical association documents are generally available
for reference from libraries. They are also distributed among technical groups
and using Federal agencies. )
2.3 Order of precedence, In the event of a conflict between the text of this
document and the references cited herein, the text of this document shall take
precedence. Nothing in this document, however, shall supersede applicable laws
and regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 First article. When specified in the contract or purchase order, a
\smaple shall be subjected to first article inspection (see 4.3, 6.2, and 6.3).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals