 |
|||
|
|
|||
| ||||||||||
|
| MIL-W-48230 (PA)
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for Inspection.-Unless otherwise
specified in the contract or purchase order, the supplier is
responsible for the performance of all inspection requirements
as specified herein. Except as otherwise specified in the
contract or order, the supplier may use his own or any other
facilities suitable for the performance of the inspection re-
quirements specified herein, unless disapproved by the Govern-
ment. The Government reserves the right to perform any of the
inspections set forth in the specification where such inspec-
tions are deemed necessary to assure supplies and services
conform to prescribed requirements. Reference shall be made
to Standard MIL-STD-109 to define terms used herein. The pro-
visions of Specification MIL-A-2550 shall apply.
4.1.1 Submission of Product .-At the time each completed
lot of items deliverable under the contract is submitted to
the Government for acceptance, the contractor shall supply the
following information accompanied by a certificate which attests
that the information provided is correct and applicable to the
product being submitted:
a. A statement that the lot complies with all of the
quality assurance provisions specified in this specification.
b. Drawing and specification number and date, together
with an identification and date of changes thereto.
c. A statement that all material purchased by the
contractor meets requirements, when such material is controlled
by Government or commercial specifications referenced in any
of the contractual documents, and that certificates of confor-
mance are on file and available for review.
d.
Number of items in the lot.
e.
Date submitted.
The certificate shall be signed by a responsible agent of the
certifying organization. The initial certificate submitted
shall be substantiated by evidence of the agent's authority to
bind his principal. Substantiation of the agent's authority
will not be required with subsequent certificates unless,
during the course of the contract, this authority is vested in
another agent of the certifying organization. A contractor
shall not knowingly include defective units in a lot.
4.1.2 Inspections .-Unless otherwise specified in the
contract, the following types of inspection(s) shall be conducted:
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals