Materials and parts shall be in accor-
dance with applicable drawings and specifications.
3.2 Metal Parts. The metal parts shall be free from
material defects, including all surface imperfections and all
internal defects resulting from flaws or lack of soundness in
the material, or resulting from improper processing of' the
material into the finished component.
3.2.1 Surface Imperfections. Surface imperfections,
include pits, seams, laps, tears, cracks, scale, blisters,
cold shuts and other defects of similar type.
3.2.2 Internal Surface Defects. Internal defects
include laminations, segregations, internal cracks,
inclusions and other defects of similar type.
The total weight of the practice warhead
shall be 9.3 0.25 pounds.
3.4 First Article Inspection. This specification makes
provisions for first article inspection. Requirements for
the submission of first article samples by the contractor
shall be as specified in the contract.
3.5 Workmanship. All parts shall be fabricated and
finished in a thorough, workmanlike manner. They shall
be free of burrs, chips, sharp edges, cracks, unblended
radii, surface defects, metal shavings, dirt, grease, rust,
corrosion products and other foreign matter. The cleaning
method used shall not be injurious to any part, nor shall the
parts be contaminated by the cleaning agent. All required
markings shall be neat and sharply defined. Known item
defects shall not be submitted with the lot.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for Inspection and Standard
Quality Assurance Provisions. Unless otherwise specified
herein or in the contract, the provisions of MIL-A-48078 (PA)
shall apply and hereby made a part of this detail