 |
|||
|
Page Title:
Table III. Vehicular Electrical System |
|
||
| ||||||||||
|
|  MIL-W-52125B
Table III. Vehicular Electrical System (Con't)
Quantity per
Description
Requirements
semitrailer
Semitrailer nose box or double
Figure 3, Waterproof type
1 Assy.
junction boxes
Rear trailer receptacle
MS75021-2 with matching
1
4-bolt spring cover
Low tension cable
MIL-C-13486, 14 AWG min.
AR
Insulation
MIL-I-15126 and MIL-I-631
AR
Loom
Polyethylene tubing or
AR
SAE J562, oilproof loom
MS21322, MS21333, and
Cushioned support clamps
AR
MS21334
Circuit number bands
MS39020
AR
MS27142 thru MS27148
Waterproof friction connectors
AR
and MS33800
Connector and splice lubricant
MIL-S-8660
AR
Plastic or metal, spring
Connector holder clip
1 per
clip
connector
Waterproof military type
Threaded plugs and receptacles
AR
Spade type per SAE J561
Terminal connectors
AR
Terminal sleeves
Heat shrinkable tubing
AR
MS39062
Circuit Breakers
3
MIL-C-13486/12 with
Intervehicular harness (for dolly
1
converter only)
MS75020 plugs on each end
mating truck to semitrailer
3.14.6.1 Lighting. All lights shall operate as specified herein on 24 volts. All lights shall be
provided with shock and vibration protection by location guarding, and through use of resilient
mountings to prolong filament life. Front and rear identification, clearance, and side-marker
lights that are not protected from vertically falling aggregate shall be cluster-mounted on plates
inserted into lamp bracket sockets conforming to SAE J725. These clusters shall be removable
for storage in the toolbox during periods or operation. Each cluster shall be equipped with
identifying plates, as specified in 3.24.1, to preclude incorrect replacement of the cluster in
preparation for travel. The rear service combination lights shall be mounted in industry standard
4-1/2 inch diameter holes. These lights shall be of the flush or recess mounted type having either
a sealed unit mounted in an elastomer ring, or a bulb and snap-in lens mounted in an elastomer
watertight housing. When furnished, bulbs shall be double contact, indexing base type,
25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals