- Sealing Compound, Thread and Gasket,
Fuel, Oil, and Water Resistant.
- Fuel, Diesel, Referee.
Sampling Procedures and Tables for
Inspection by Attributes.
Marking for Shipment and Storage.
Identification Marking of U.S. Military
Human Engineering Design Criteria
For Military Systems, Equipment and
2.1.2 Other Government drawings. The following other Government drawings form
a part of this specification to the extent specified herein. Unless otherwise
specified, the issues shall be those in effect on the date of the solicitation.
Control Assembly, Pressure Filling.
Container, Shipping, Reusable.
(Copies of specifications, standards, and drawings, required by contractors in
connection with specific acquisition functions should be obtained from the
contracting activity or as directed by the contracting officer.)
2.2 Order of precedence. In the event of a conflict between the text of this
specification and the references cited herein, (except for associated detail
specification sheets or MS standards), the text of this specification shall take
precedence. Nothing in this specification, however, shall supersede applicable
laws and regulations unless a specific exemption has been obtained.
3.1 Description. The control, pressure, filling, nonvented drum (herein after
called "control assembly") shall be in accordance with Top Assembly TA13215E8372
and as specified herein.
3.1.1 Drawings. The drawings forming a part of this specification are end
product drawings. No deviation from the prescribed dimensions or tolerances is
permissible without prior approval of the contracting officer. Where tolerances
could cumulatively result in incorrect fit, the contractor shall provide
tolerances within those prescribed on the drawings to insure correct fit,