TABLE III. Trailer body specifications. (Cont'd)
VMRS 34-004 (Cont'd)
Wiring supported at max. 36-in. spacing with
anchored elastomer ties or coated clamps to
prevent whipping, chafing, and mechanical or
Interior of mechanical splicing devices
waterproofed with RTV silicone sealant. Wire
per TMC-ATA RP-110 equipped with
terminals per TMC-ATA RP 112.
Disconnect points for multiple circuits (in
excess of 4 ea.) of the waterproof plug type or
of the nut and stud junction block type.
Junction blocks coated with electrical varnish
Wire-to-wire terminals secured to vehicle.
For positive return ground, provide ground
wires between engine, body, and any other
component not assured of a reliable
metal-to-metal electrical pathway.
Provide, circuit breakers per SAE J553
protecting all circuits.
Fuses and fusible links not acceptable.
Housing - Dome Lamp.
As specified, inside the body provide at least
2-ea. dome lamps with accessible switches, one
in each end of the body. Locate the switch
inside, near the personnel door.
Dome lamps same as rear vehicular
combination lamps except for single filament
and clear or frosted lens.
Dome lamps flush mounted in standard
4-1/2-in. holes per TTMA RP No. 14.
Wire the dome lamps into the front trailer
circuit breaker for the Auxiliary Power Circuit,
BLU, No. 7, of the TTMA RP No. 40