Click here to make tpub.com your Home Page

Page Title: Notes
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
All classes of electrode and rod
Up
Electrodes and Rods - Welding, Bare, Solid and Alloyed Cored, General Specification For
Next
First article inspection



img
MIL-E-23765B(SH)
"WARNI NC :  Protect yourself and others.  Read and understand this
label.
FUMES AND GASES can be dangerous to your health. ARC RAYS can
injure eyes and skin.  ELECTRIC SHOCK can kill.
l Read and understand the manufacturer's instructions and your
employer's safety practices
l Keep your head out of the fumes.
l Use enough ventilation exhaust at the arc, or both, to keep
fumes and gases from your breathing zone and the general area.
. Wear correct eye, ear, and body protection.
l Do not touch live electrical parts.
l See American National Standard 249.1, `Safety in Welding and
Cutting-, published by the American Welding Society,
550 NW LeJeune Road, P.O. Box 351040, Miami, FL 33135: OSHA
Safety and Health Standards, 29 CFR 1910, available from the
Superintendent of Documents, U.S. Government Printing Office,
Washington, DC 20402.
.
DO NOT REMOVE THIS LABEL"
5.3.1.2 Exterior shipping containers and palletized unit loads. In
addition to the marking information required for interior packages as specified
in 5.3.1.1, except the caution label, the information shall include shipping
s
destination, stock number furnished with contract or order, customer order
number, customers item number, and customer's name.
6.1 Intended use.  Solid bare and alloyed cored welding electrodes and
cut-length rods are intended for use with the GMA, GTA and SAW welding processes.
6.2 Ordering data.
Acquisition documents should specify
6.2.1 Acquisition requirements.
the following:
Title, number, and date of this specification.
(a)
(b)
Title, number and date of the applicable detail specification.
(c)
Types, forms and sizes required (see 1.2).
(d)
When first article is required (see 3.3).
(e)
Whether alloy identity testing of each electrode or rod after
final marking is required (see 3.5.5.2).
(f) Whether 12 or 18 inch rods are required (see 3.7.2).
(g) Level of packaging and packing required (see 5.1 and 5.2).
(h) Special marking required (see 5.3).
6.2.2 Data requirements.  When this specification is used in an acquisi-
tion which incorporates a DD Form 1423, Contract Data Requirements List (CDRL),
the data requirements identified below shall be developed as specified by an
approved Data Item Description (DD Form 1664) and delivered in accordance with
the approved CDRL incorporated into the contract.  When the provisions of FAR
..227-7031 are invoked and the DD Form 1423 is not used, the data specified

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +