Time Totalizinq Meter - The equipment shall have a time
totalizing meter in accordance with MIL-STD-454, Req. 57.
Cables and Connectors - The equipment shall provide for
the use of cables and connectors In accordance with MIL-T-21200.
3.3.6 Wiring (Internal) -
Internal wiring shall be in accordance
with the requirements o
- External wiring shall be in accordance
with the requirements of
lnterchangeability - The equipment shall meet the inter-
changeability requirements as defined in MIL-T-21200.
Interference Control - The generation of radio interference
by the equipment shall be controlled within the limits of MIL-STD-461 to
the extent described herein.
Tests required shall be as defined for Class 11 B equipment
by Table II of MIL-STD-461A except that electromagnetic and E-field emissions
shall not exceed the limits established by MIL-STD-461A for Class II B equip-
ment by more than 30 dB.
Maintenance Provisions and Field Testin - Provisions for
maintenance snail be as specified in MIL-T-21200. Speci c test points and
test facilities shall be provided to the greatest extent practicable for ease
of field testing and maintenance.
Nomenclature and Nameplates - Nomenclature assignment and
namplate approval for equipment identi fication shall be in accordance with
Standard Conditions - The following conditions shall be used
to establish normal performance characteristics under standard conditions and
for making laboratory bench tests:
Room ambient (30°
VAC (line to neutral), 3 Phase,
Service Conditions - The equipment shall operate satisfactorily
under any of the environment service conditions or reasonable combination of
these conditions as specified in MIL-T-21200 for Class 2 equipment, except as